Non-thermal Adsorption Refrigeration Dryer

4
1
2
3
4 1 2 3

Non-thermal Adsorption Refrigeration Dryer

Micro-heat regeneration adsorption dryer is an energy-saving and high-efficiency dryer. It is a product developed by absorbing the advantages of thermal regeneration and non-heat regeneration. The purging regeneration can save the regeneration air consumption, the regeneration effect is good, and the adsorption working time is longer.

  • Eliminate the phenomenon of channeling, and it is resistant to corrosion and durable, and will never be replaced
  • Energy saving conditions can be set
  • The gas consumption of heatless regeneration is less than 15%
  • The tower body has a reasonable design and structure, and saves 95% of the heat of adsorption
Description
Technical Data
More Details
Contact Us Now
Description
  1. The air distributor in the adsorption tower adopts the large-section stainless steel diffuser developed by Senfiltration to ensure that the air flow evenly passes through the desiccant layer, which eliminates the phenomenon of channeling, and is corrosion-resistant and durable, and will never be replaced.
  2. The amount of regeneration gas can be set according to the dew point requirements, inlet flow, pressure and temperature to set the best energy-saving working conditions. It can also adjust the amount of regeneration gas according to the operating load requirements of the suction dryer to achieve energy-saving effects.
  3. The design and structure of the tower body is reasonable, and 95% of the adsorption heat is preserved, which is used to increase the air temperature during regeneration, improve the desorption capacity of the equipment, and make the regeneration complete.

Technical Data

More Details
  1. Reasonable tower structure and control procedures to ensure the impact position and contact time of compressed air and desiccant;
  2. The adsorbent adopts national standard high-purity alumina, molecular sieve, and vacuum negative pressure filling method, which is not easy to pulverize and has a long service life;
  3. Adopt the adsorption tank with the pressure vessel certificate, the safety performance is guaranteed;
  4. The heater has high strength performance, high voltage resistance, electric shock resistance, and good heating insulation;
  5. Using intelligent controller, real-time display of operating parameters, high precision, better system stability, easy to operate;
  6. High-performance pneumatic control valve, fast action response, long service life, good stability; equipped with standard low-power solenoid valve, high precision, fast action response;
Contact Us Now

Contact Us For A Quick Quote

Full Non-thermal Adsorption Refrigeration Dryer

Design Support

Email Support

Industrial Screw Air Compressor

Non-thermal Adsorption Refrigeration Dryer

Non-thermal Adsorption Refrigeration Dryer Manufacturer and Supplier

The heatless regenerative adsorption dryer is a device for drying compressed air according to the principle of pressure swing. It absorbs the moisture in the compressed air under pressure to dry the compressed air, and uses a part of the dry compressed air for purging during decompression. The adsorbent is used to regenerate the adsorbent. The two towers are alternated with each other to obtain dry compressed air. Different adsorbents are selected according to the dew point of the compressed air pressure. The commonly used adsorbents are activated alumina and molecular sieve.

Reasonable tower structure and control procedures ensure the impact position and contact time of compressed air and desiccant. The adsorption tank with pressure vessel certificate is used to ensure safety performance; high-performance pneumatic control valve, quick response and long service life